5GHZ LONG RANGE PTP WIRELESS BRIDGE

Name: 5GHZ LONG RANGE PTP WIRELESS BRIDGE
SKU: AP5G4

SKU: AP5G4 Categories: Connectivity, Networking, Remote Access

AP5G4 - Long Range PTP Wireless Bridge and Access Point

5GHZ LONG RANGE PTP WIRELESS BRIDGE

SKU: AP5G4 Categories: Connectivity, Networking, Remote Access

Wirelessly transmit data over a mile in distance
Access internet from a remote location
Designed for use outdoors
Easy to setup and use

Specifications

Chipset		Qualcomm QCA9563+QCA9886+QCA8334
Standard		802.11ac/a/n, MU-MIMO Technology
Memory		128MB DDR2 RAM
Interface		1 x 10/100/1000Mbps RJ45 WAN Port, 1 x 48V PoE Input, 1 x 10/100/1000Mbps RJ45 LAN Port, 1 x Reset Button, 1 x DC Jack, 1 x AP / Repeater Operation mode switch
Antenna		Built in 14dBi MIMO Panel Antenna
Power Supply		802.3at 48V PoE or DC12V 1.5A
RF Data \| Frequency		5GHz: 802.11a/ac, 5GHz: 4920~5920MHz
RF Data \| Throughput		867Mbps
RF Power		802.11ac 20MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain, 802.11ac 20MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain, 802.11ac 20MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain, 802.11ac 40MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain, 802.11ac 40MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain, 802.11ac 80MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain, 802.11ac 80MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain, 802.11ac 80MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain, 802.11ac 40MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain
Receiving Sensitivity		802.11ac Rx Sensitivity 20MHz BW, MCS9 -62dBm, MCS7 -67 dBm, MCS0 -89 dBm, 802.11ac Rx Sensitivity 40MHz BW, MCS9 -61dBm, MCS7 -66 dBm, MCS0 -88 dBm, 802.11ac Rx Sensitivity 80MHz BW, MCS9 -60dBm, MCS7 -65 dBm, MCS0 -87 dBm
EVM		802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB
PPM		±20ppm
Package Contents		Pair of 867Mbps Outdoor PTP wireless access points / bridges, pole mounting bands, LAN patch cables
Operating Temperature		-30~45 ℃
Storage Temperature		-40~70 ℃ Humidity: 5%~95% non-condensing

Resources

PDF Spec Sheet – AP5G4

Installation Guide – How to Connect

2.71 mile range with AP5G4 wireless bridge and access point

Features

Simple to Set Up and Easy to Use
Indoor or Outdoor Applications
Password Protected
5GHz Frequency Range
IP65 Weatherproof

HIGH POWER, MORE RANGE

The AP5G4 can power up to 25dBm, equipped with 14dBi panel antenna, while the point-to-point wireless range up to 3.5KM distance.

Overview

The AP5G4 is an 11ac Wave2.0 standard high power industrial 5.8G outdoor CPE. It complies with the next generation 802.11ac Wi-Fi standard, MU-MIMO, Qualcomm Chipset, combined 867Mbps high speed in 5.8G, equipped with a Gigabit RJ45 port and PoE support, making this wireless device perfect of installation all over the world for long-range PTP/PTMP application.

867MBPS DATA RATE & GIGABIT WAN/LAN PORTS

The AP5G4 features 802.11ac Wi-Fi and 2*2 MIMO technology, 867Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high-speed internet access and more end users’ access.

5GHZ FREQUENCY, MORE CHANNELS, LOWER LATENCY, HIGHER STABILITY

Utilizing a 4.92GHz to 5.92GHz frequency range, avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.

AP5G4 - Long Range PTP Wireless Bridge and Access Point Connections

EASY TO INSTALL

POWER OVER ETHERNET

The AP5G4 has an integrated active 48V Power over Ethernet (PoE), for easy installation and lower cost. This wireless bridge can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

If a PoE injector is needed, use the AP5G4-INJ model.

Applications

Provide building-to-building connectivity with these long range, high transmission wireless devices that can be used as wireless bridges, repeaters, or access points. Connect to cameras or other network devices that are off of the main building.