4ch Weatherproof DVR

4ch Weatherproof DVR

  • NEMA rated outdoor enclosure with fan and thermostat
  • Full featured H.264 compression DVR for extended record time and faster network transmission
  • 6-outlet power strip for 24V devices like heated housings or PTZ’s
  • The mounting brackets allow for flush or pole mounting
  • 2.4 Ghz wireless bridge for transmitting distances up to 1.5 miles over wireless LAN

Overview

4 Channel, self-contained HD weatherproof DVR packaged inside AL191912 for remote site recording. Package includes PWR98A power supply, LED monitor, 4ch HD DVR from Optiview with 4TB storage, and universal mounting brackets for wall or pole mounting.

Specifications

Material   5052 Aluminum
Color   Silver/Metallic
Power Supply   9ch 12VDC, 8amp
Voltage   120V AC (Power Strip)
Mounting Plate Material   Aluminum
Mounting Plate Dimensions   17" × 16" (431.8mm × 406.4mm)
Weight (Enclosure Only)   41 lbs
Outside Dimensions   19" × 19" × 12" (482.6mm × 482.6mm × 304.8mm)
Cable Feed   1.2" Cable Conduit Connector
Ratings   NEMA Type 3R

Resources

PDF Spec Sheet – Download

ArmorLogix NEMA 3 rated weatherproof enclosures
Marine Grade 5052 Aluminum Construction
Sunshade for ArmorLogix Weatherproof Enclosures

360° Cooling

Each Armorlogix enclosure comes standard with both a built-in sunshade and 2x Universal Mounting Brackets enabling true 360° cooling around the outside of your enclosure. The included sunshade allows for additional natural temperature control and airflow, and the rain guard prevents water from collecting on the top of the door seals. The sunshield also acts like a heat sink by absorbing heat from within the enclosure and then dispersing it by colder air circulating past the top. In addition, the ArmorLogix sunshield reflects the suns rays from hitting the top on the enclosure helping reduce additional sources of heat the interior of the enclosure. By keeping the enclosure away from the wall, the Universal Mounting Plate’s offset design allows for a full 360° of airflow circulation, and keeps interior condensation at a minimum.

Universal Wall and Pole Mounting Brackets for ArmorLogix aluminum enclosures
Blank Aluminum Plate for Equipment Mounting

Blank Equipment Plate

Included in each enclosure is a blank aluminum equipment mounting plate, that is both adjustable and removable. By being removable, ArmorLogix’s blank aluminum equipment plate allows the user to mount their own equipment easily both inside the enclosure or outside and removes the need to drill additional holes into the enclosure.

Secure Locks for Weatherproof Enclosures
AL_InfinityScroll_Hex_MylarInsulation

Mylar Bubble Insulation

Mylar bubble insulation is two layers of 1/8″ barrier bubble film laminated between two layers of metalized film. Our enclosures when paired with Mylar Bubble Insulation helps keep the interior of your box climate controlled.

AL_InfinityScroll_Hex_3MSeal_V3
AL_InfinityScroll_Hex_NEMA3Vent

NEMA 3

This ArmorLogix enclosure is rated NEMA 3 providing protection against splashing, dripping water, precipitation, and airborne dust and dirt particles. This model comes with vents on the side and front, allowing you to add an optional fan to the front to keep your enclosure cool by expelling hot air within the enclosure out.

AL_InfinityScroll_Hex_Accessories

* NEMA3 enclosures contain vents on the door and sides. NEMA4 enclosures are non-vented.

** Mylar insulation is included in every enclosure except the AL202222 and AL202222N.

Aluminum EnclosuresCustom Built Solutions4ch Weatherproof DVR