Weatherproof Outdoor IP Camera Surveillance System with Edge Recording

Weatherproof Outdoor IP Camera Surveillance System with Edge Recording

  • 12 x 12 x 11″ 5052 Marine Grade enclosure with Thermostatic Fan
  • 4+1 port 48V PoE Switch
  • 2 x 4MP IP dome cameras with built-in Mic’s and Edge Recording
  • Universal Mounting Brackets for installing on walls, poles, or to Unistrut


Wall or pole mount site surveillance kit is ideal for locations in which the user wants to only record when motion is detected, such as construction sites, boat docks, marinas, remote locations, or railways and railroad exchanges. The WPIP2SD-256 is set up for 110 power and can be either temporarily, or permanently installed.

IP4MIAB-28-SDA IP surveillance cameras can either be attached to the enclosure or installed separately.

If 110V shore power is not available, a low voltage or solar ready weatherproof surveillance kit is available.

Add On for Remote Connectivity:

  • 3G / 4G Cellular Modem with GPS package
  • Wireless Bridge


Enclosure | Material   5052 Marine Grade Aluminum
Enclosure | Color   Silver/Metallic
Enclosure | Voltage   120V AC (Power Strip)
Enclosure | Mounting Plate Material   Aluminum
Enclosure | Mounting Plate Dimensions   9" x 10"
Enclosure | Thermostatic Fan   Included
Enclosure | Security   Cam Lock
Enclosure | Outside Dimensions   12" x 12" x 11"
Enclosure | Ratings   NEMA 3
Enclosure | Cable Feed   1.5" Non-Metallic Seal Tight Straight Connector
Weight (Enclosure Only)   11 lbs
Poe Switch | Power Supply   External Power Adaptor
Poe Switch | Voltage Range   DC48V ~ 56V
Poe Switch | Consumption   < 3W
Poe Switch | Speed   1-5 Ports: 1/100Mbps
Uplink: 100Mbps SFP
Poe Switch | Ethernet Standard   IEEE 802.3 / 802.3u / 802.3af / 802.3at
Poe Switch | Switch Capacity   1.2 G
Poe Switch | Transfer Rate   14,880 pps for 10Mbps
148,800 pps for 100Mbps
Poe Switch | MAC Address   2K MAC Address Table
Poe Switch | LED   SFP Link / ACT On + Green = Connecting
Link / ACT Blinks = Port is receiving or transmitting data
Link / ACT off = Not linked with the device
POE On + Orange = PD is connected
POE Off = No PD is connected or power forwarding failure
Poe Switch | Operating & Storage Temperature   -40° ~ 167° F
Poe Switch | Humidity   10~85%
Poe Switch | Dimensions   6.5" x 2.9" x 5.6"
Poe Switch | Weight   2.3 lbs
Poe Switch | Color   Black & White
Camera | Resolution   4MP (2688 x 1520)
Camera | RAM / ROM   128M / 128M
Camera | Minimum Illumination   0.008 LUX @ F1.6
Camera | IR Distance / LEDs / Control   98ft / 2 / Auto or Manual
Camera | Lens Type   2.8mm Ultra Wide Fixed (102° View)
Camera | Adjustment Range   H: 0°–360°
V: 0°–78°
Rotation: 0°–360°
Camera | Analytics   Tripwire / Intrusion / Motion Detect
Camera | Streaming   2 Streams
Camera | Audio   Built in Mic with G.711a / G.711Mu / AAC / G.726 compression
Camera | Ethernet   RJ-45 (10/100Base-T)
Camera | Protocol   IPv4; IPv6; HTTP; HTTPS; TCP; UDP; ARP; RTP ; RTSP; RTCP; RTMP; SMTP; FTP; SFTP; DHCP; DNS; DDNS; QoS; UPnP; NTP; Multicast; ICMP; IGMP; NFS; PPPoE; 802.1x; Bonjour
Camera | Recording   FTP / SFTP / NAS / Up to 256GB SD card
Camera | Remote Viewing   Optiview VMS / VMX / VMX+ / Mobile App
Camera | Power & Consumption   DC12V, PoE (802.3af) / <6.6W (each)
Camera | Material & Rating   Powder Coated Aluminum / IP67 Weatherproof


PDF Spec Sheet – Coming Soon

ArmorLogix NEMA 3 rated weatherproof enclosures
Marine Grade 5052 Aluminum Construction
Sunshade for ArmorLogix Weatherproof Enclosures

360° Cooling

Each Armorlogix enclosure comes standard with both a built-in sunshade and 2x Universal Mounting Brackets enabling true 360° cooling around the outside of your enclosure. The included sunshade allows for additional natural temperature control and airflow, and the rain guard prevents water from collecting on the top of the door seals. The sunshield also acts like a heat sink by absorbing heat from within the enclosure and then dispersing it by colder air circulating past the top. In addition, the ArmorLogix sunshield reflects the suns rays from hitting the top on the enclosure helping reduce additional sources of heat the interior of the enclosure. By keeping the enclosure away from the wall, the Universal Mounting Plate’s offset design allows for a full 360° of airflow circulation, and keeps interior condensation at a minimum.

Universal Wall and Pole Mounting Brackets for ArmorLogix aluminum enclosures
Blank Aluminum Plate for Equipment Mounting

Blank Equipment Plate

Included in each enclosure is a blank aluminum equipment mounting plate, that is both adjustable and removable. By being removable, ArmorLogix’s blank aluminum equipment plate allows the user to mount their own equipment easily both inside the enclosure or outside and removes the need to drill additional holes into the enclosure.

Secure Locks for Weatherproof Enclosures

Mylar Bubble Insulation

Mylar bubble insulation is two layers of 1/8″ barrier bubble film laminated between two layers of metalized film. Our enclosures when paired with Mylar Bubble Insulation helps keep the interior of your box climate controlled.



This ArmorLogix enclosure is rated NEMA 3 providing protection against splashing, dripping water, precipitation, and airborne dust and dirt particles. This model comes with vents on the side and front, allowing you to add an optional fan to the front to keep your enclosure cool by expelling hot air within the enclosure out.


* NEMA3 enclosures contain vents on the door and sides. NEMA4 enclosures are non-vented.

** Mylar insulation is included in every enclosure except the AL202222N3 and AL202222N4.

Aluminum EnclosuresCustom Built SolutionsWeatherproof Outdoor IP Camera Surveillance System with Edge Recording