TURNKEY REMOTE SITE POWER
ArmorLogix Power. Your Equipment. Your Peace of Mind.
Most “solar surveillance solutions” aren’t really solutions, they’re ecosystems. Buy the kit, get the camera. Buy the camera, accept the VMS. Need a second camera? Hope it’s the same brand. Need a sensor, a radio, a speaker? Start over.
The SM400 was built for the way integrators actually work. You pick your cameras. You pick your sensors. You pick your VMS and the backhaul. We deliver the power, the enclosure, the PoE, and the visibility to keep it all running regardless if it’s on the pole, on the wall, or on the platform, wherever the site demands.
It’s equipment-agnostic. On purpose.
Axis, Hanwha, Bosch, Verkada, Rhombus, Avigilon, your sensor vendor, your radio vendor, if it runs on PoE, it runs on the SM400. No forced bundles. No proprietary handshakes. No “we only support our own hardware.” The platforms dominating the solar surveillance market today (Hikvision, Dahua, TP-Link VIGI) all route you back to their own ecosystem. The SM400 doesn’t have an ecosystem to sell you. It has a job to do.
It’s NDAA compliant and it matters.
The two largest solar surveillance OEMs in the world are under tightening U.S. restrictions, and Canada has already banned one outright. If you’re specifying for federal, state, education, healthcare, or utility projects, “NDAA compliant remote site power” is now a starting-line requirement. The SM400 meets it out of the box and pairs cleanly with the compliant cameras, sensors, and radios you already carry.
PoE Powered IoT.
With four 30W per port (and customizable up to 90W per port), power any of your cameras, sensors, communications, or IoT devices cleanly out of the box. No separate injector chassis, no extra DIN rail real estate, no extra failure points in a weatherproof enclosure. Competing pole-mount kits still ship with injectors as add-ons, so you end up buying, wiring, and supporting three products instead of one.
It Has The Power budget to do real work.
400W of solar paired with a 200Ah LiFePO4 battery isn’t the same category as a 60W or 90W integrated camera kit. It’s the difference between one low-power fixed camera and a multi-camera deployment with PTZ, analytics, a speaker, and a cellular router, all running 24/7, through cloudy weeks, without babysitting.
Real-Time System Health.
Integrated smart power monitoring sends battery health, solar generation, and equipment status back to you in real time. The field-service truck roll, the one that eats your margin on every remote site, becomes the exception, not the routine.
Built for the harshest of environments.
27” x 22” x 13” of 5052 marine-grade aluminum. Rust and corrosion resistant. Plenty of room inside for an NVR, a router, a UPS, whatever the project needs, and a mounting canvas outside for the cameras, antennas, and peripherals that make the deployment work. Powder-coated steel enclosures, which most competitors still use, don’t age the same way at a coastal site or a salt-spread roadway. The screened vents allow airflow, while the mylar insulation and built-in sunshade helps with heat dissipation, keeping your system cool and running optimally.
What the SM400 Replaces
- Integrated solar camera kits that cap you at one camera and one brand
- Mobile trailer deployments that cost $15K–$35K (or $1,600+/month rentals) when the site doesn’t actually need wheels
- DIY solar rigs cobbled together from consumer power stations and off-brand panels, with no monitoring, no warranty, no one to call at 2 a.m.
- Traditional line-voltage installs requiring trenching, permits, and utility coordination that kill timelines at remote sites
Where Integrators Are Deploying It
- Perimeter & Critical Infrastructure means there could be miles of fence line with no power runs. The SM400 deploys where the grid doesn’t reach, keeping cameras, sensors, and communications running without trenching or utility coordination.
- Construction Sites aren’t permanent and your solution doesn’t have to be either. Equipment changes. Layouts shift. The SM400 moves with the job, no brand lock-in means your camera and sensor choices aren’t dictated by the power platform.
- Docks & Marinas’ harsh environment can cost you greatly if you choose incorrectly. Salt air eats powder-coated steel. Marine-grade aluminum and real-time monitoring keep your deployment running through the conditions that take other systems offline.
SOLAR POWER MODULE SPECIFICATIONS
Solar | 400W Fixed Module
Battery | 200Ah LiFePO4
PoE | 4 ports, 30W per port, integrated switch
Monitoring | Real-time battery, solar, & status notifications
Enclosure | 27″ x 22″ x 13″, 5052 marine-grade aluminum
Mounting | Pole, Wall, or Platform
Compliance | NDAA compliant
Compatibility | Equipment-agnostic
Ready to spec the SM400 into your next project?
Give us a call today or reach out via email to get set up with your Account Manager and to discuss how ArmorLogix can help you protect your assets. 904.674.2976 • Sales@ArmorLogix.com